Grandstream Analogue Telephone Adaptor - Manual Configuration

Grandstream has a range of great ATA devices. The below guide is how to configure these with an Aatrox SIP trunk.

FXS Page Settings

• Account Active:  Yes
• Primary SIP Server:  nsip.aatroxcommunications.com.au
• Prefer Primary SIP Server:  Yes
• Outbound Proxy:  nsip.aatroxcommunications.com.au
• SIP Transport: UDP
• SIP URI Scheme When Using TLS:  sip
• NAT Traversal:  Keep-Alive
• SIP User ID:  <your phone number>  (e.g. 032420000)
• Authenticate ID:  <your phone number>  (e.g. 032420000)
• Authenticate Password:  <your phone password>
• Name:  <your phone number>  (e.g. 032420000)
• DNS Mode:  A Record
• SIP Registration:  Yes
• Unregister On Reboot:  No
• Outgoing Call without Registration:  Yes
• Register Expiration:  5
• SIP Registration Failure Retry Wait Time:  20
• Local SIP Port:  5060
• Local RTP Port:  5004
• Preferred DTMF method Priority:  RFC2833, SIP INFO, in-audio
• Disable Call-Waiting:  No  (change to Yes if you don't want to be interrupted on a call)
• Ring Timeout: 120  (or leave at 60 if preferred)
• No Key Entry Timeout:  4  (adjust this timeout to your preference)
• Use # as Dial Key:  Yes
• Dial Plan:  
  • Australia - QLD:
    {<=07>[23456789]xxxxxxx | 61[23478]xxxxxxxx | 0[23478]xxxxxxxx | 13[12]xxx | 1[38]00xxxxxx | 000}
    
    
  • Australia - NSW/ACT:
    {<=02>[23456789]xxxxxxx | 61[23478]xxxxxxxx | 0[23478]xxxxxxxx | 13[12]xxx | 1[38]00xxxxxx | 000}
    
    
  • Australia - VIC/TAS:
    {<=03>[23456789]xxxxxxx | 61[23478]xxxxxxxx | 0[23478]xxxxxxxx | 13[12]xxx | 1[38]00xxxxxx | 000}
    
    
  • Australia - WA/SA/NT:
    {<=08>[23456789]xxxxxxx | 61[23478]xxxxxxxx | 0[23478]xxxxxxxx | 13[12]xxx | 1[38]00xxxxxx | 000}
    
    
  • New Zealand:
    {0[234679]xxxxxxx | 02xxx. | [2458]xxxxxx | 0[589]xxxxxxx. | 64xxxx.  | 111}
• Preferred Vocoder Order:  PCMA, G722, G729, PCMU, iLBC, OPUS, G723, G726-32
• VAD:  No
• Fax Mode:  T.38
• Jitter Buffer Type:  Adaptive  (Change to Fixed if you have voice quality problems)
• Jitter Buffer Length:  Medium  (Change to High if you have voice quality problems)
• SLIC Setting:  AUS/NEW ZEALAND
• Caller ID Scheme:  Bellcore/Telcordia
• Gain:  TX 0dB, RX -6dB  (Change to adjust Transmit and Receive Volumes)
• Enable Call Features:  No  (Recommended to use our Cloud features)

If you are connecting your Grandstream ATA to a Fax machine then please adjust the settings as followed:

• Disable Call-Waiting:  Yes
• Disable Call-Waiting Caller ID:  Yes
• Disable Call-Waiting Tone:  Yes
• Jitter Buffer Type:  Fixed
• Jitter Buffer Length:  High
• Disable Line Echo Canceller (LEC):  Yes
• Disable Network Echo Suppressor:  Yes
• Fax Mode:  T.38
• Re-INVITE After Fax Tone Detected:  Enabled
• Preferred Vocoder choice 1:  PCMA